Pre-finished skirting: factory-painted and ready to go

    Stack of white pre-finished MDF skirting boards with an even satin finish next to a light timber floor

    Pre-finished skirting has already been fully primed and painted at the factory. After installation, it does not need painting all over; only cut edges, nail holes and joints are touched up. Pre-finished skirting boards are usually made of MDF and are most often supplied in white.

    What is pre-finished skirting?

    Skirting boards are supplied in different levels of finish:

    FinishWhat does it mean?
    UntreatedRaw material, still needs priming and painting
    PrimedSupplied with a primer coat, ready to paint in any colour
    Pre-finishedPainted at the factory, only touching up after installation
    Foil-wrappedCovered with a foil layer in a colour or wood decor

    Where is it used?

    Pre-finished skirting is practical in homes where work needs to be quick and clean, such as an occupied home or a flat where no decorator will be coming. It is also widely used in new builds and renovations, where white skirting is the standard.

    What should you look out for?

    • Colour: check whether the factory colour matches your doors and frames. White is not always the same white; see RAL 9010.
    • Sheen level: pre-finished skirting has a fixed sheen level. If you want it to match your doors, repainting is sometimes necessary.
    • Touching up: cut edges and mitres are untreated after cutting. They are touched up, especially with MDF, which can absorb moisture.
    • Caulking: the joint between skirting and wall is caulked with paintable acrylic caulk in a matching colour.
    • Handling: the paint finish is vulnerable to scratches. Careful storage and handling are needed.

    You can read how it compares with painting yourself in painting skirting or pre-finished?.

    At TipTop Plinten

    TipTop Plinten fits skirting boards that are pre-finished or handed over paint-ready, and can also finish them directly in a RAL colour. The joints are caulked for a crisp overall look. Read more about skirting board installation.

    Frequently asked questions

    Usually not completely. After installation, nail holes, cut edges and mitres are touched up and the joints are caulked. If you want a different colour or sheen level from the factory finish, primed skirting is often the better choice.

    White is the most common, often in shades such as RAL 9010 or RAL 9016. Some suppliers also offer other colours pre-finished or painted to order.

    Related

    Skirting board installation? Request a free quote

    On-site measurement €75 incl. VAT (credited for orders above a minimum project size)