
Looking to have skirting boards fitted in Vught? TipTop Plinten works from 's-Hertogenbosch, and Vught borders it directly to the south. Randy van Dijk fits skirting boards, architraves, decorative mouldings and wall panels there, with his own caulking and finishing in any RAL colour. That applies to the centre of Vught as well as to Cromvoirt and Helvoirt. A quote is free and without obligation.
Living in Vught: plenty of variety under one name
Vught is known as a green residential municipality with many villas and detached houses, often on generous plots with lots of trees. There are also streets with homes from the early twentieth century and the 1930s, post-war residential areas and more recent new builds. Helvoirt and Cromvoirt each have their own village centre with a mix of older farmhouses, village homes and newer houses.
That variety means there is no standard skirting board that suits every home. What works in a sleekly renovated house can look out of place in a villa full of character.
Fitting skirting in Vught: from villa to terraced house
Villas and detached houses
In spacious homes with high ceilings, a low, flat skirting board tends to disappear. A taller skirting board, profiled or not, gives the wall more presence. It is often paired with a matching architrave around the doors, and sometimes coving to complete the look. You can find examples of profiles in classic skirting board profiles.
1930s and older homes
In older properties, walls and corners are rarely straight. An internal corner that is 90 degrees on the drawing sometimes turns out to be 87 or 93 degrees in reality. In that case every internal and external corner is measured and cut separately. Where the old skirting is still original, it is worth checking whether the profile can be reproduced or matched. More on this in skirting boards in a 1930s house.
New builds and renovated homes
In new builds or after a thorough renovation, the walls are flat and a sleek, modern look works well: skirting in the wall colour, aluminium skirting or shadow gap skirting that is included in the renovation schedule.
Herringbone and oak: skirting for a floor with character
In villas and homes with character, many residents choose a wooden floor, from oak planks to herringbone. With a floor like that, the junction between floor and skirting is visible and therefore important. A solid wood skirting board can be chosen in the same species as the floor, while a painted MDF skirting board gives a calm, light edge instead. What to look out for with herringbone is explained in skirting for herringbone floors.
White, off-white or in the wall colour?
In classic homes, the choice is often between different shades of white. RAL 9010 is slightly warmer and softer, RAL 9016 fresher and cooler. Next to a warm oak floor or a wall in an off-white shade, the difference is more noticeable than you might expect. Read the comparison in white skirting: RAL 9010 or 9016.
You can also have the skirting fitted paint-ready, so that your own decorator can paint it in one go along with the walls and frames. Or it can be finished directly in the RAL colour of your choice, so no painting is needed after installation. Which route is more practical depends mainly on the schedule for the rest of the renovation.
Services in Vught
- Skirting board installation: MDF (including moisture-resistant), solid wood and aluminium. TipTop Plinten deliberately does not fit plastic skirting.
- Architraves: classic or sleek surrounds for doors and openings.
- Decorative mouldings and coving: from simple coving to more elaborate mouldings; see also coving and cornices.
- Wall panels and wall mouldings: for example wainscoting in a hallway or dining room.
- Caulking and finishing: crisp joints, paint-ready or in colour.
How it works
Send photos of the rooms, the floor type and your wishes for material and colour via WhatsApp (+31 6 28438086) or email (info@tiptopplinten.nl); you are welcome to write in English. You will then receive a free, no-obligation quote. If the situation is complex, for example with lots of corners or uneven walls, Randy can visit for an on-site measurement. This costs €75 incl. VAT and is deducted on jobs above a minimum project size. Then come the installation, mitres, caulking and finishing.
How much work a project involves depends on the number of metres, corners and the substrate. You will hear this with the quote.
Vught and the surrounding area
Vught is a few kilometres from the centre of 's-Hertogenbosch. As well as Vught, Cromvoirt and Helvoirt, TipTop Plinten works in the places around them, such as Esch, Gemonde and Sint-Michielsgestel. Also take a look at the Den Bosch, Sint-Michielsgestel and Boxtel pages, or the full service area.
Get in touch for a no-obligation quote.
Frequently asked questions
Yes. Villas and older homes often suit a taller, profiled skirting board, possibly combined with architraves and coving. The skirting is made in MDF or solid wood and can be finished in any RAL colour.
Yes. Cromvoirt and Helvoirt belong to the municipality of Vught and are close to our base in 's-Hertogenbosch. They are simply within the service area.
Yes, but it takes more measuring and fitting. Every corner is measured separately and the mitres are cut to the actual angle. Small gaps between skirting and wall are finished with paintable acrylic caulk.
Not always. A quote based on photos is free and without obligation. For a large or complex home a site survey can be worthwhile; it costs €75 incl. VAT and is deducted as a discount on jobs above a minimum project size.
Related

Architrave
An architrave is the moulding fitted around a door or window frame. It covers the joint between the frame and the wall and gives the opening a surround.

Coving
Coving finishes the corner between wall and ceiling. It hides hairline cracks and unevenness and gives a room a finished top edge.

Solid wood
Solid wood is timber in one piece, without pressed fibres. It gives skirting boards a natural look, but moves with temperature and humidity.

Internal & external corner
An internal corner points away from you, an external corner points towards you. With skirting boards, each type of corner needs its own cutting direction and approach.

Site survey
During a site survey, the measurements and conditions are recorded on site: metres, corners, walls and floor. That makes the quote and the materials precise.

Choosing skirting
Classic skirting boards: which profiles are there and what suits your interior?
A classic skirting board has a profile that catches light and shadow. This is how to recognise the best-known profiles and choose skirting that suits your home.

Choosing skirting
Skirting boards in a 1930s house: keeping the character, finishing it neatly
High ceilings, wooden floors and walls that are not straight: a 1930s house calls for skirting that suits both its character and the reality of an older home.

Mouldings & walls
Coving and cornices: the difference, types and installation
Coving gives the transition between wall and ceiling a crisp finish and completes a room. We explain how it differs from a cornice, which profiles are available and how they are fitted.

Floors & skirting
Skirting for a herringbone floor: how to finish the edge
A herringbone floor deserves skirting that gives the edge a calm finish. Here is how to choose material, colour and height, and avoid a messy zigzag edge.

Skirting board installation by a specialist skirting fitter
TipTop Plinten fits skirting boards in MDF, solid wood and aluminium, finished in any RAL colour and neatly matched to any floor, even with uneven walls.

Architrave fitting around doors, frames and openings
An architrave gives a door or opening a neat surround and covers the joint between frame and wall. TipTop Plinten fits made-to-measure architraves.

Decorative mouldings and coving installation
Decorative mouldings and coving give a room character. TipTop Plinten fits them in classic or minimal modern styles, with precise mitres and clean caulking.
Skirting board installation? Request a free quote
On-site measurement €75 incl. VAT (credited for orders above a minimum project size)
