
Would you like skirting boards fitted in Rosmalen? No problem: TipTop Plinten works from 's-Hertogenbosch, and Rosmalen sits right next to it, on the eastern side of the municipality. Randy van Dijk fits skirting boards in MDF, solid wood and aluminium there, and also takes care of architraves, mouldings, wall panels and caulking. Whether you live in a new-build home in De Groote Wielen or an older house in Hintham, you can request a quote free of charge and without obligation.
Rosmalen: village, city district and new-build area in one
Rosmalen has been part of the municipality of 's-Hertogenbosch since 1996, but it has kept its own character. Broadly speaking, you will find three kinds of homes there:
- De Groote Wielen, the large new-build district north of the centre of Rosmalen, which has been and is still being built in phases.
- Residential areas from recent decades, such as Sparrenburg and Molenhoek, with many terraced and semi-detached houses.
- Older housing in the village centre and in Hintham, on the Den Bosch side, where you will also find pre-war and early post-war homes.
Each of these types of home calls for a slightly different approach to the skirting.
New builds in De Groote Wielen
When a new-build home is handed over, you often find bare walls with no skirting, or skirting that does not match the floor that is laid later. In that case it makes sense to plan the skirting together with the floor. First the vinyl, laminate or parquet floor goes down, then the skirting follows, neatly covering the expansion gap along the wall.
In a new-build home the walls are usually flat and the corners reasonably square. The choice is then mainly about style:
- a sleek tall skirting board in the same colour as the wall, for a calm look;
- skirting in a contrasting colour, for example matt black;
- shadow gap skirting, if you are still in the building phase and the plastering has yet to be done.
Read more in skirting boards in new builds and skirting boards for a vinyl floor.
Older homes in Hintham and the village centre
In older homes, walls are rarely completely straight. For the skirting to look crisp, each corner has to be measured and mitred to the actual angle, not to a standard 45 degrees. Gaps between skirting and wall are finished with paintable acrylic caulk.
Sometimes the old skirting boards are still firmly in place and in good condition, but no longer suit the new floor. Then the question is whether to remove them or have overlay skirting fitted over the top. When the latter makes sense is explained in overlay skirting boards: when are they a smart choice?.
Skirting board fitter in Rosmalen: what you can have done
A skirting board fitter does more than just put skirting on the wall. In Rosmalen, TipTop Plinten can help you with:
- Skirting board installation in MDF (moisture-resistant where needed), solid wood or aluminium, in any RAL colour. Plastic skirting is deliberately not fitted.
- Architraves around interior doors and openings, so that door and skirting form a single whole.
- Decorative mouldings and coving, for example to give a new-build ceiling a little more character.
- Wall panels and wall mouldings, including acoustic panels for a living room that echoes.
- Caulking and finishing, paint-ready or directly in colour.
Contractors and floor fitters finishing homes in Rosmalen or De Groote Wielen can also outsource the skirting installation.
How a job works
- Request: send a few photos, your address in Rosmalen, the floor type and an estimate of the linear metres via WhatsApp (+31 6 28438086) or email (info@tiptopplinten.nl). You are welcome to write in English.
- Quote: you receive a free, no-obligation quote.
- Site survey (optional): if in doubt or in a tricky situation, Randy will visit. An on-site measurement costs €75 incl. VAT and is deducted on jobs above a minimum project size.
- Installation: fitting, mitres, caulking and finishing.
How much work it involves depends on the number of metres, corners and the substrate. You will hear this with the quote. The full process is described in skirting board installation: the process.
Also in the villages around Rosmalen
Rosmalen is a few kilometres from the centre of Den Bosch. As well as Rosmalen itself, TipTop Plinten works in Hintham, Sparrenburg, Molenhoek and De Groote Wielen, and in the nearby villages: Nuland, Kruisstraat, Empel and Berlicum. A little further east, the Oss, Uden and Veghel region begins; to the south lies Sint-Michielsgestel. You can read more about our base itself on the Den Bosch page, and the full service area is in the overview.
Want to know what is possible in your home? Request a quote with a few photos of the room.
Frequently asked questions
Yes. De Groote Wielen is part of Rosmalen and lies close to our base in 's-Hertogenbosch. In this new-build district in particular, questions about skirting for a new vinyl or laminate floor and about skirting in the wall colour come up a lot.
Yes. Nuland and Kruisstraat are in the immediate vicinity of Rosmalen and are simply part of the service area. TipTop Plinten also works throughout the Netherlands.
In most cases, yes, because the skirting covers the expansion gap along the floor. With shadow gap skirting it is the other way round: that recessed profile has to be installed before the plastering. So discuss the order of work early in the project.
An on-site measurement costs €75 incl. VAT, including personal advice. The amount is deducted as a discount on jobs above a minimum project size. A quote based on photos is free and without obligation.
Related

Shadow gap skirting
Shadow gap skirting sits flush with or behind the wall, with a narrow shadow line above it. The result is a minimalist wall that seems almost to float.

Tall skirting
Tall skirting is usually 12 cm or higher. It gives a room calm and elegance, provided the height suits the ceiling and the interior.

Vinyl flooring
Vinyl (PVC) flooring is a synthetic floor printed with a wood or stone look. Whether it floats or is glued down determines how the skirting meets it.

Mitre joint
A mitre is an angled cut that lets two mouldings meet seamlessly in a corner. For a right angle, that is usually 2 x 45 degrees.

Site survey
During a site survey, the measurements and conditions are recorded on site: metres, corners, walls and floor. That makes the quote and the materials precise.

Floors & skirting
Skirting boards in a new build: when to fit them and what to look out for
In a new build, the skirting goes in after the floor and the wall finish. Here is how to plan the order and choose skirting that suits a new home.

Floors & skirting
Skirting boards for a vinyl (PVC) floor: what should you look out for?
A vinyl (PVC) floor is thin and sleek, so the junction with the skirting stands out straight away. This is the difference between glue-down and click vinyl and what it means for your skirting.

Choosing skirting
Overlay skirting boards: when are they a smart choice?
Removing old skirting can damage plaster or tiles. Overlay skirting goes over the top instead. Here is how to tell whether that is sensible in your situation.

Costs & process
Having skirting boards fitted: how it works from enquiry to finish
From the first message to the final caulk line: this is how having skirting boards fitted by TipTop Plinten works, and what you can arrange yourself beforehand.

Skirting board installation by a specialist skirting fitter
TipTop Plinten fits skirting boards in MDF, solid wood and aluminium, finished in any RAL colour and neatly matched to any floor, even with uneven walls.

Architrave fitting around doors, frames and openings
An architrave gives a door or opening a neat surround and covers the joint between frame and wall. TipTop Plinten fits made-to-measure architraves.

Caulking skirting boards and sealant work for a seamless finish
Caulking is the final step that makes skirting boards, mouldings and panels look seamless. TipTop Plinten uses acrylic or silicone, paint-ready or in colour.
Skirting board installation? Request a free quote
On-site measurement €75 incl. VAT (credited for orders above a minimum project size)
