
Would you like skirting boards fitted in Helmond? Working from 's-Hertogenbosch, TipTop Plinten also covers Helmond and the surrounding places, such as Mierlo, Stiphout, Deurne and Geldrop. You can come to us for skirting boards in MDF, solid wood and aluminium, finished in any RAL colour, and for architraves, decorative mouldings and coving, wall panels and caulking. Owner Randy van Dijk has more than five years of experience. A quote is free and without obligation.
Helmond: from historic-style new builds to older streets
Helmond lies east of Eindhoven, about 35 kilometres from Den Bosch. The city has a remarkably varied housing stock, and you can see that in the choice of skirting and mouldings.
Brandevoort and De Veste
Brandevoort is Helmond's best-known new-build district. Its heart, De Veste, is designed as a small fortified town with canals and squares, and many homes are built in a historic style. From the outside such a house can look a century old, while inside it is simply a new build with flat walls and a modern floor.
That makes for an interesting choice. A taller, classic profiled skirting board matches the architecture of the district. Combine it with an architrave around the interior doors or a decorative moulding along the ceiling, and the interior ties in better with the façade. Because the walls in new builds are usually straight, the mitres of such a profile come out crisp.
Dierdonk, Rijpelberg and other districts
In districts such as Dierdonk and Rijpelberg there are many family homes where a new floor is laid at some point. The old skirting then often no longer matches the height of the new floor or no longer suits the new style. A modern flat skirting board in the wall colour, or a contrasting colour instead, finishes the room off again.
The centre and older streets
Around the centre and in older streets of Helmond and Stiphout, there are homes where walls and corners are not always square. There, each corner is measured and the skirting is fitted to measure where needed. Also read made-to-measure skirting for uneven walls.
MDF skirting boards in Helmond
For most homes in Helmond, MDF is a logical choice. MDF is dimensionally stable, takes a crisp profile and is finished in any RAL colour, for example RAL 9010 white or matt black. For a hallway, utility room or another room where moisture may occur, there is moisture-resistant MDF.
A few considerations when choosing:
| Situation | What often works well |
|---|---|
| Historic-style home (Brandevoort) | Tall, profiled MDF skirting, possibly with architraves |
| Family home with a new vinyl or laminate floor | Flat MDF skirting in the wall colour |
| Sleek modern interior | Aluminium or a slim, flat skirting board |
| Warm, natural look | Solid wood |
The pros and cons of MDF are set out in MDF skirting boards: pros and cons. TipTop Plinten deliberately does not fit plastic skirting.
Fitting skirting in Helmond: how it works
Whether you call it laying, fitting or installing skirting boards, the process is always the same.
- Request: send a few photos, the district or street, an estimate of the linear metres, the floor type and your wishes for material and colour via WhatsApp (+31 6 28438086) or email (info@tiptopplinten.nl). You are welcome to write in English.
- Quote: you receive a free, no-obligation quote. A reply usually follows within 24 hours.
- Site survey (optional): if in doubt or in a tricky situation, Randy visits for an on-site measurement for €75 incl. VAT, deducted on jobs above a minimum project size.
- Installation and finishing: fitting, mitres, caulking and finishing in colour or paint-ready.
How much work it involves depends on the number of metres, corners and the substrate. You will hear this with the quote. You can read more about the approach on the skirting board installation page.
Finishing new builds in Helmond
Helmond is still growing. If you will soon be getting the keys to a new-build home, it is useful to plan the skirting in good time: after the floor, and in consultation with the decorator. If you opt for shadow gap skirting as a recessed profile, it even has to be included before the plastering. See also skirting boards in new builds. Contractors and floor fitters in the region can also outsource the skirting installation.
Services in Helmond
- Skirting board installation in MDF, solid wood and aluminium.
- Architraves around doors and openings.
- Decorative mouldings and coving, classic or modern.
- Wall panels and wall mouldings, including acoustic panels.
- Caulking and finishing.
Places around Helmond
TipTop Plinten works in Helmond and in Brandevoort, Dierdonk, Rijpelberg, Stiphout, Mierlo, Deurne, Geldrop and Nuenen. Live on the other side of Eindhoven? Then take a look at the Eindhoven or Veldhoven page. You can find our base on the Den Bosch page, and all regions are listed under service area.
Frequently asked questions
Yes. TipTop Plinten is based in 's-Hertogenbosch, about 35 kilometres from Helmond, and works throughout the Netherlands. Districts such as Brandevoort, Dierdonk, Rijpelberg and Stiphout and places such as Mierlo, Deurne and Geldrop are part of the service area too.
Many homes in Brandevoort are built in a historic style. A taller, profiled skirting board often suits them, possibly combined with architraves around the doors. If you prefer to keep the interior sleek, you can also choose flat skirting in the wall colour.
Yes. MDF is dimensionally stable, can be finished crisply and is available in any RAL colour. For rooms where moisture may occur, such as a hallway or utility room, moisture-resistant MDF can be used. Solid wood and aluminium are also possible.
An on-site measurement costs €75 incl. VAT, including personal advice. This amount is deducted as a discount on jobs above a minimum project size. A quote based on photos is free and without obligation.
Related

MDF
MDF is a sheet material made of pressed wood fibres. It is stable, smooth and easy to paint, which makes it the most popular material for skirting boards.

Moisture-resistant MDF
Moisture-resistant MDF is MDF treated to make it less sensitive to moisture. It is suitable for rooms where standard MDF would quickly swell.

Decorative moulding
A decorative moulding is an ornamental profile on a wall or ceiling. It gives a room character, from classic ornament to a sleek modern line.

Architrave
An architrave is the moulding fitted around a door or window frame. It covers the joint between the frame and the wall and gives the opening a surround.

Mitre joint
A mitre is an angled cut that lets two mouldings meet seamlessly in a corner. For a right angle, that is usually 2 x 45 degrees.

Choosing skirting
Classic skirting boards: which profiles are there and what suits your interior?
A classic skirting board has a profile that catches light and shadow. This is how to recognise the best-known profiles and choose skirting that suits your home.

Choosing skirting
MDF skirting boards: pros, cons and when to choose them
MDF is the most popular material for skirting boards, but not the best choice in every situation. These are the advantages, the disadvantages and the pitfalls.

Floors & skirting
Skirting boards in a new build: when to fit them and what to look out for
In a new build, the skirting goes in after the floor and the wall finish. Here is how to plan the order and choose skirting that suits a new home.

Skirting board installation by a specialist skirting fitter
TipTop Plinten fits skirting boards in MDF, solid wood and aluminium, finished in any RAL colour and neatly matched to any floor, even with uneven walls.

Architrave fitting around doors, frames and openings
An architrave gives a door or opening a neat surround and covers the joint between frame and wall. TipTop Plinten fits made-to-measure architraves.

Decorative mouldings and coving installation
Decorative mouldings and coving give a room character. TipTop Plinten fits them in classic or minimal modern styles, with precise mitres and clean caulking.
Skirting board installation? Request a free quote
On-site measurement €75 incl. VAT (credited for orders above a minimum project size)
