
Would you like skirting boards fitted in Veldhoven? Working from 's-Hertogenbosch, TipTop Plinten also covers Veldhoven, from the new builds in Zilverackers to the older streets of Zeelst, Oerle and Meerveldhoven, as well as neighbouring Waalre. You can choose from skirting boards in MDF, solid wood and aluminium, finished in any RAL colour. Architraves, mouldings, wall panels and caulking are part of the service too. The quote is free and without obligation.
Veldhoven: old village centres and lots of new builds
Veldhoven lies directly south-west of Eindhoven, about 35 kilometres from Den Bosch. The municipality grew out of a number of villages, including Veldhoven, Meerveldhoven, Zeelst and Oerle. Large residential areas were built around those old centres in the second half of the last century, and on the western side Zilverackers has been growing for several years.
That results in three kinds of request, each with its own approach.
Zilverackers and Huysackers: planning new builds properly from the start
In Zilverackers, Huysackers is the first sub-area, with energy-efficient new-build homes. In new builds the walls are usually flat and the corners square, so the choice is mainly about style and planning:
- Flat skirting in the wall colour for a calm overall look.
- Tall skirting if you want more line in the room.
- Shadow gap skirting as a recessed profile; this has to be installed before the plastering, so early consultation with the contractor is needed.
You can read more about the order of floor, skirting and decorator in skirting boards in new builds.
Residential areas with a new floor
In Veldhoven's existing districts, a new floor is often laid, for example vinyl or laminate. The old skirting boards by no means always fit afterwards. With a vinyl floor, look for a neat junction and a thin caulk line along the top of the skirting. See also skirting boards for a vinyl floor. If the old skirting boards are stuck fast to the wall, overlay skirting can sometimes be a solution.
Older homes in the village centres
The old centres of Zeelst, Oerle and Veldhoven-Dorp also have older homes and farmhouses. There, walls are not always straight. Each corner is then measured separately and, where needed, the skirting is fitted to measure so that no gaps remain visible.
Which material should you choose?
The choice of material depends mainly on the style of the home and how the room is used:
- MDF: dimensionally stable, can be finished crisply and is available in any RAL colour. For a hallway, utility room or toilet, moisture-resistant MDF is an option.
- Solid wood: warm and natural, for example with a wooden floor in an older home.
- Aluminium: slim and sleek, suited to large tiles, a poured floor or a minimalist interior.
Torn between wood and MDF? Read wooden skirting or MDF.
Skirting board fitter in Veldhoven for private clients and businesses
There is a lot of building and renovation going on in Veldhoven and neighbouring Eindhoven. As well as private clients, TipTop Plinten works for contractors, floor fitters and interior fit-out companies who want to outsource the skirting installation. Arrangements for scheduling, materials and finishing are made per project. More on this in skirting for contractors and floor fitters.
What you can have fitted
- Skirting board installation: MDF, solid wood and aluminium, in any RAL colour. Plastic skirting is deliberately not fitted.
- Caulking and finishing: paintable acrylic caulk along wall and skirting, paint-ready or directly in colour.
- Architraves around doors and openings.
- Wall panels and wall mouldings, for example slats behind the TV or acoustic panels in an open-plan kitchen-living room.
- Decorative mouldings and coving.
How it works
- Request: send photos of the room, the location, an estimate of the linear metres, the floor type and your wishes for material and colour via WhatsApp (+31 6 28438086) or email (info@tiptopplinten.nl). You are welcome to write in English.
- Free quote: you receive a no-obligation quote, usually with a reply within 24 hours.
- Site survey (optional): if in doubt, an on-site measurement follows for €75 incl. VAT, deducted on jobs above a minimum project size.
- Installation: fitting, mitres and caulking, finished in colour or paint-ready.
How much work a project involves depends on the number of metres, corners and the substrate; you will hear this with the quote.
Places around Veldhoven
TipTop Plinten works in Veldhoven and in Zilverackers, Huysackers, Zeelst, Oerle, Meerveldhoven, Waalre and Eersel. If your town is not listed, just ask. For the city itself there is a separate page on Eindhoven; to the north lies Best. You can find all regions under service area, and our base on the Den Bosch page.
Get in touch for a free quote.
Frequently asked questions
Yes. TipTop Plinten is based in 's-Hertogenbosch, some 35 kilometres from Veldhoven, and works throughout the Netherlands. Zeelst, Oerle, Meerveldhoven, Zilverackers and neighbouring Waalre are part of the service area too.
Skirting boards are usually fitted once the floor is down, and before or in consultation with the decorator. If you want recessed shadow gap skirting, that profile has to be installed before the plastering. So discuss this early with the contractor.
Sometimes, yes. Overlay skirting can cover old skirting boards, for example if they are stuck fast or if you want to avoid damaging the wall. Whether it comes out neatly depends on the thickness of the old skirting and how it meets the floor and door frames.
Send photos, an estimate of the metres and the floor type via WhatsApp or email; the quote is free and without obligation. An on-site measurement costs €75 incl. VAT and is deducted on jobs above a minimum project size.
Related

Shadow gap skirting
Shadow gap skirting sits flush with or behind the wall, with a narrow shadow line above it. The result is a minimalist wall that seems almost to float.

Tall skirting
Tall skirting is usually 12 cm or higher. It gives a room calm and elegance, provided the height suits the ceiling and the interior.

Vinyl flooring
Vinyl (PVC) flooring is a synthetic floor printed with a wood or stone look. Whether it floats or is glued down determines how the skirting meets it.

Caulking
Caulking means sealing joints with a flexible sealant. With skirting boards and mouldings, it makes the transition to the wall crisp and seamless.

Site survey
During a site survey, the measurements and conditions are recorded on site: metres, corners, walls and floor. That makes the quote and the materials precise.

Floors & skirting
Skirting boards in a new build: when to fit them and what to look out for
In a new build, the skirting goes in after the floor and the wall finish. Here is how to plan the order and choose skirting that suits a new home.

Floors & skirting
Skirting boards for a vinyl (PVC) floor: what should you look out for?
A vinyl (PVC) floor is thin and sleek, so the junction with the skirting stands out straight away. This is the difference between glue-down and click vinyl and what it means for your skirting.

Costs & process
Skirting for contractors and floor fitters: outsourcing the finish to a specialist
The floor is down, handover is approaching and the skirting has to be spot on. This is how TipTop Plinten, as a finishing specialist, fits in with the work of contractors and floor fitters.

Skirting board installation by a specialist skirting fitter
TipTop Plinten fits skirting boards in MDF, solid wood and aluminium, finished in any RAL colour and neatly matched to any floor, even with uneven walls.

Caulking skirting boards and sealant work for a seamless finish
Caulking is the final step that makes skirting boards, mouldings and panels look seamless. TipTop Plinten uses acrylic or silicone, paint-ready or in colour.

Wall panelling installation and wall mouldings fitted
TipTop Plinten fits wall panels, wall mouldings, slat panels and acoustic panels in homes, offices and hotels, with tight mitres and clean caulking.
Skirting board installation? Request a free quote
On-site measurement €75 incl. VAT (credited for orders above a minimum project size)
