White skirting boards: RAL 9010 or RAL 9016?

    Choosing skirting · 6 min read

    White skirting board and white door frame in the same shade next to a light wooden floor

    White skirting boards are the most popular choice in the Netherlands, but white is not just white. The two colours used most often are RAL 9010 (pure white), with a slight, warm undertone, and RAL 9016 (traffic white), which looks brighter and cooler. Which of the two works best depends mainly on the colour of your doors and frames: that is where the skirting meets them, and that is where you notice a difference in white soonest.

    In this article we explain how the two colours differ, how to choose the right white and which finish is most practical.

    RAL 9010 and RAL 9016: what is the difference?

    RAL is a European colour system in which every colour has a fixed code. This means you can have skirting boards, doors and frames finished in exactly the same colour.

    • RAL 9010 – pure white. A soft white with a slight yellow, warm undertone. It looks calm and is widely used in homes, as well as in hotels. At the hotel in Maastricht, for example, all the wall panels and decorative mouldings were finished in RAL 9010.
    • RAL 9016 – traffic white. A bright, fresh white that looks cooler. It suits sleek, modern interiors and walls in cool white or grey.

    On its own you will hardly notice the difference. Side by side you will: RAL 9010 then looks slightly creamier and RAL 9016 slightly whiter. Other white shades, such as cream white (RAL 9001), are also used, especially in classic interiors.

    How do you choose the right white?

    1. Start with the doors and frames

    The skirting board almost always ends against a door frame or architrave. If that is a different white, you will see a clear transition at that point. If you know which RAL colour the doors and frames are, choose the same colour for the skirting. If you don't, hold a sample or offcut against the frame and judge it in daylight.

    2. Look at the wall colour

    • White wall: white skirting in a similar white gives the calmest look.
    • Off-white or a warm colour on the wall: RAL 9010 often blends in more naturally.
    • Cool white, grey or blue-grey on the wall: RAL 9016 often looks fresher.

    3. Take daylight into account

    North-facing rooms get cooler light; there, a warm white can look slightly yellowish. South-facing rooms with a lot of warm light can make a cool white look a little harsh. So judge samples in the room itself, at different times of day.

    Two white skirting boards side by side in a slightly warmer and a slightly cooler shade of white

    Sheen level: matt, eggshell or satin?

    Besides the colour, the sheen level determines how a white skirting board looks.

    Sheen levelLookPractical
    MattModern, calmMarks and scuffs show more readily
    EggshellCrisp, slight sheenEasy to keep clean, forgiving
    SatinClassic, fresherEasy to keep clean, shows imperfections slightly more
    High glossPronouncedEvery imperfection in wall and skirting is visible

    For most homes, eggshell or satin is a good choice. Ideally, match the sheen level to that of the doors, so everything reads as a single whole.

    Pre-finished or painted after installation?

    White skirting boards are usually made of MDF, because MDF takes an even paint finish. There are two routes:

    • Pre-finished skirting boards are already painted in the factory, often in a standard white. After installation, nail holes and joints are touched up and caulked.
    • Paint-ready skirting boards have a primer coat and are painted in the colour of your choice after installation. This gives the most freedom to match the doors and frames exactly.

    If you want a specific white, such as RAL 9016 because your doors are that colour, check whether the pre-finished standard white really matches it. You can read more about choosing between materials in MDF skirting boards: pros and cons.

    Caulking with white skirting boards

    The joint between skirting and wall is preferably sealed with a paintable acrylic caulk. This can be painted over in the colour of the wall or the skirting. A white caulk that is a slightly different shade from the skirting stands out in raking light. Silicone sealant cannot be painted, so it is generally not used along skirting boards against the wall. You can read more about the finishing on our caulking service page.

    Common mistakes with white skirting boards

    • Mixing different whites. Skirting in RAL 9016, doors in RAL 9010 and an architrave in yet another white. Not noticeable individually, but together they are.
    • High gloss on an uneven wall. Every undulation in the wall shows in the reflection.
    • Too little attention to the caulk line. A ragged or yellowed caulk line stands out all the more on a white skirting board.
    • Choosing the colour under artificial light. A white that looked perfect under shop lighting can look different at home in daylight.

    White skirting boards and architraves as one

    Around doors, the skirting, frame and architrave come together. If they all get the same white and the same sheen level, the door reads as one with the skirting. If architraves are replaced or added later, take the skirting colour as your starting point. Read more on our architrave installation service page.

    White, or a colour after all?

    White remains the safest choice, but it is not the only one. Black skirting boards in RAL 9005, for example, create a graphic contrast; read more in black skirting boards in RAL 9005. If you would rather the skirting disappeared, it can also be finished in exactly the wall colour. With tall skirting boards, that is a way to use plenty of height without it looking heavy.

    Having white skirting boards fitted

    TipTop Plinten fits skirting boards in MDF, solid wood and aluminium, finished in any RAL colour, including RAL 9010, RAL 9016 or the white of your doors. This includes made-to-measure mitres, junctions with frames and architraves, and clean caulking. Take a look at our skirting board installation service for more information.

    Request a quote

    Unsure whether to choose RAL 9010 or RAL 9016, or would you like the skirting matched to your doors? Send us a few photos of the skirting, doors and floor via the contact page, along with an estimate of the number of linear metres. The quote is free and without obligation. If you would like us to assess colours and junctions on site, an on-site measurement is available for €75 incl. VAT; this amount is credited as a discount on jobs above a minimum project size. We are happy to communicate in English, as well as in Dutch, German, Turkish, Persian and Arabic.

    Frequently asked questions

    RAL 9010 (pure white) is a white with a slight, warm undertone. RAL 9016 (traffic white) is brighter and looks cooler. On their own, both simply look white; side by side, or next to another white door, you can see the difference.

    Match the white to the doors and frames, because that is where the skirting meets them. If you don't know the colour of the doors, hold a sample or offcut next to the door in daylight. If in doubt, that gives you more certainty than a colour chart.

    Not necessarily. White skirting against a white wall gives a calm look; white skirting against a coloured wall creates a clear frame. Skirting in exactly the wall colour is also possible and gives a modern, uniform look.

    Satin and eggshell are popular choices. They are easy to keep clean and are more forgiving of small imperfections than high gloss. A matt finish looks modern, but is slightly more prone to marks.

    Yes. TipTop Plinten can finish skirting boards in any RAL colour, including RAL 9010, RAL 9016 or another white that matches your doors and frames.

    Related articles

    Related

    Skirting board installation? Request a free quote

    On-site measurement €75 incl. VAT (credited for orders above a minimum project size)