
Would you like skirting boards fitted in Waalwijk? TipTop Plinten works from 's-Hertogenbosch, about 20 kilometres east of Waalwijk, and covers the whole Langstraat: Waalwijk, Sprang-Capelle, Waspik and neighbouring Kaatsheuvel. Randy van Dijk fits skirting boards in MDF, solid wood and aluminium, finished in any RAL colour, and also takes care of architraves, mouldings, wall panels and caulking. You can request a quote free of charge.
Waalwijk and the Langstraat
The Langstraat is the strip of villages and small towns between Den Bosch and Geertruidenberg, with Waalwijk as the largest. The area has long been known for its leather and shoe industry. The housing stock is mixed: older homes in districts such as Besoyen and Baardwijk, many family homes from the post-war expansions, and new builds on the western side, in Landgoed Driessen next to Sprang-Capelle.
That mix determines the questions that come up about skirting.
Fitting skirting in Waalwijk: common situations
A new floor in an existing home
The reason we hear most often: a new laminate, vinyl or herringbone floor is going in and the old skirting boards no longer suit it. With a floating floor, an expansion gap has to be left along the wall, and the new skirting has to cover it neatly. That calls for the right skirting height and thickness. Which skirting boards for laminate? explains what to look out for. If the old skirting has to come off, removing skirting boards without damage will help.
New builds in Landgoed Driessen
In a new-build home the walls are flat and the choice is mainly a question of style. A sleek MDF skirting board in the wall colour gives a calm look; matt black skirting adds contrast. Schedule the skirting straight after the floor has been laid, so everything comes together in one go. More in skirting boards in new builds.
Older homes in Besoyen and Baardwijk
In older houses, walls are often not completely straight and corners not always square. The skirting is then measured corner by corner and cut to measure. Around the interior doors, an architrave completes the look, especially if the old door trims are damaged.
Flats in and around the centre
In and around the centre of Waalwijk there are also blocks of flats. These often have a concrete floor with a vinyl or laminate floor on top, and smoothly finished walls. A sleek MDF skirting board in the wall colour or a slim aluminium skirting board works well there. For a flat with a shared entrance, it helps to mention with your request where we can park and whether there is a lift.
Which material for your home?
At TipTop Plinten you can choose from three materials:
- MDF: dimensionally stable, smooth and available in any RAL colour. For places that can get damper, such as a utility room or a hallway by the front door, there is moisture-resistant MDF.
- Solid wood: for those who want to see the wood grain or are looking for a classic profile.
- Aluminium: slim and sleek, for a modern interior.
Plastic skirting is deliberately not fitted. Still unsure? Use the checklist for choosing skirting boards.
What the skirting board fitter in Waalwijk does for you
Skirting board installation covers the whole process: removing the old skirting if necessary, cutting the new skirting to size, mitring the corners, fixing it and then caulking with paintable acrylic caulk. The result is paint-ready or finished directly in colour. As well as private clients, TipTop Plinten also works for contractors, floor fitters and interior fit-out companies in the region.
Cables and pipes along the skirting
In many homes in the Langstraat, cables for the TV, internet or speakers run along the wall. Cable skirting has space at the back to hide them, so no channels need to be cut into the wall. The skirting is also neatly cut out around radiator pipes. See skirting around radiators and pipes.
How it works
- Request: send photos, your address in the Langstraat, the floor type and an estimate of the metres via WhatsApp (+31 6 28438086) or email (info@tiptopplinten.nl). You are welcome to write in English.
- Free quote: without obligation, based on your details.
- Site survey (optional): at your home for €75 incl. VAT, deducted on jobs above a minimum project size.
- Installation and finishing: fitting, mitres, caulking.
How much work it involves depends on the number of metres, corners and the substrate. You will hear this with the quote.
Places around Waalwijk
TipTop Plinten works in Waalwijk, Besoyen, Baardwijk, Sprang-Capelle, Waspik, Kaatsheuvel, Loon op Zand and Raamsdonksveer. Towards Den Bosch lies the municipality of Heusden, with Drunen and Vlijmen; to the south, the Tilburg region. Also take a look at Den Bosch or the full service area.
Frequently asked questions
Yes. Waalwijk lies about 20 kilometres west of 's-Hertogenbosch, where TipTop Plinten is based. We work throughout the Netherlands, so in Waalwijk and the rest of the Langstraat too.
Often, yes. With a floating floor, an expansion gap is left along the wall, which the skirting has to cover. Old skirting boards are sometimes too low for this or get damaged when removed. Mention this with your request.
Yes, and in Sprang-Capelle, Loon op Zand and Raamsdonksveer too. Please mention the location, the type of home and the floor type with your request.
No. A quote based on photos is free and without obligation. An on-site measurement costs €75 incl. VAT and is deducted as a discount on jobs above a minimum project size.
Related

Skirting board
A skirting board is the moulding at the base of the wall that finishes the transition to the floor and protects the wall. Here is how it works and what to look out for.

MDF
MDF is a sheet material made of pressed wood fibres. It is stable, smooth and easy to paint, which makes it the most popular material for skirting boards.

Moisture-resistant MDF
Moisture-resistant MDF is MDF treated to make it less sensitive to moisture. It is suitable for rooms where standard MDF would quickly swell.

Laminate
Laminate is a floating floor made of pressed board with a printed layer. The skirting covers the perimeter gap and is fixed to the wall, not the floor.

Caulking
Caulking means sealing joints with a flexible sealant. With skirting boards and mouldings, it makes the transition to the wall crisp and seamless.

Floors & skirting
Which skirting boards suit a laminate floor?
With laminate, the skirting board has a technical job: covering the expansion gap without pinning the floor down. Here is how to choose the right skirting and fixing method.

Floors & skirting
Skirting boards in a new build: when to fit them and what to look out for
In a new build, the skirting goes in after the floor and the wall finish. Here is how to plan the order and choose skirting that suits a new home.

Installation & finishing
Removing skirting boards without damaging the wall or floor
Old skirting boards are best removed step by step: cut through the caulk line, find out how they are fixed and prise them off carefully while protecting the wall.

Choosing skirting
Which skirting boards to choose? A checklist for types, height and colour
Not sure which skirting boards to choose? This checklist takes you through every decision, from material and height to colour, floor and fixing, so you choose a skirting board that fits.

Skirting board installation by a specialist skirting fitter
TipTop Plinten fits skirting boards in MDF, solid wood and aluminium, finished in any RAL colour and neatly matched to any floor, even with uneven walls.

Caulking skirting boards and sealant work for a seamless finish
Caulking is the final step that makes skirting boards, mouldings and panels look seamless. TipTop Plinten uses acrylic or silicone, paint-ready or in colour.

Architrave fitting around doors, frames and openings
An architrave gives a door or opening a neat surround and covers the joint between frame and wall. TipTop Plinten fits made-to-measure architraves.
Skirting board installation? Request a free quote
On-site measurement €75 incl. VAT (credited for orders above a minimum project size)
